Keysight MP4300 Series - Page 181

Keysight MP4362A
MP4362A
Test Record
Report Number ______ Date__________
Test Description Min. Specs Results Max. Specs
Voltage Programming & Readback
Minimum voltage (Vout):
Voltage measured over interface:
High voltage (Vout):
Voltage measured over interface:
-0.025
Vout - 0.02
129.8775
Vout - 0.124
_______
_______
_______
_______
0.025
Vout + 0.02
130.1225
Vout + 0.124
CV Ripple and Noise
peak-to-peak:
rms:
N/A
N/A
_______
_______
0.5
0.05
Current Programming & Readback
Minimum current (Iout):
Current measured over interface:
High current (Iout):
Current measured over interface:
- 0.01
Iout - 0.025
7.974
Iout - 0.041
_______
_______
_______
_______
0.01
Iout + 0.025
8.026
Iout + 0.041
Current Sink Test
Negative current rating: - 511 mA _______ - 489 mA
MP4362A UUT Settings Programmed Source Settings
Voltage Programming & Readback Min:
Voltage Programming & Readback High:
CV Ripple and Noise:
Current Programming & Readback Min:
Current Programming & Readback High:
Current Rating (Isink):
Voltage priority: 0 V, 1 A
Voltage priority: 130 V, 1 A
Voltage priority: 80 V, 8.2 A
Current priority: 130 V, 0 A
Current priority: 130 V, 8 A
Current priority: 132 V, -0.5 A
not used
not used
not used
not used
not used
Voltage priority: 130 V, 0.52 A
Keysight MP4300 Series Operating and Service Guide 181
6 Verification and Calibration