Keysight MP4300 Series - Page 23

MEMory
:COPY
:TABLe <"name"> Copies the specified table to non-volatile memory.
:DELete
[:NAME] <"name"> Deletes the specified table in both volatile and non-volatile memory.
:ALL Deletes all tables in both volatile and non-volatile memory.
:TABLe
:CATalog? Returns the names of all tables in volatile and non-volatile memory.
:CURRent
[:MAGNitude] <current>{,<current>} Programs a list of current points for a new table.
:POINts? Returns the number of current points in the active table.
:SELect <"name"> Creates a new table in volatile memory.
:VOLTage
[:MAGNitude] <current>{,<current>} Programs a list of voltage points for a new table.
:POINts? Returns the number of voltage points in the active table.
OUTPut
[:STATe] 0|OFF|1|ON, (@<chanlist>) Enables or disables the output.
:INHibit
:MODE LATChing|OFF Sets the operating mode of the remote inhibit digital pin.
:PON
:STATe RST|RCL0 Sets the output power-on state.
:PROTection
:CLEar (@<chanlist>) Resets the latched protection.
:COUPle 0|OFF|1|ON Enables or disables channel coupling for protection faults.
:OT
:AMBient:MARGin? Returns the difference between over-temp and ambient temp.
:TUNNel:MARGin? (@<chanlist>) Returns the difference between heatsink over-temp and temp.
Keysight MP4300 Series Operating and Service Guide 23
1 Quick Reference