6 Input/Output
6.1 RF Source
Slot Status Query (Remote Command Only)
Returns the status of the specified slot.
Remote
Command
:SYSTem:LKEY:WAVeform:STATus? <int>
or
:SYSTem:LICense[:FPACk]:WAVeform:STATus? <int>
Example
:SYST:LKEY:WAV:STAT? 1
<"Locked"
or
:SYST:LIC:WAV:STAT? 1
<"Locked"
Notes The command form :SYSTem:LICense[:FPACk]:WAVeform:STATus is provided for
consistency with Keysight signal sources. You can use either form
Waveform slot number <int> is positive. If you attempt to input a slot number less than or equal to 0,
an error is generated
Result type is string. If input slot number exceeds total available slot numbers, “Nonexistent” is returned
Range "Locked" | "Available" | “Trail” | “LockRequired” | “Nonexistent”
Slots Free Query (Remote Query Only)
Returns the number of license slots free.
Remote
Command
:SYSTem:LKEY:WAVeform:FREE?
or
:SYSTem:LICense[:FPACk]:WAVeform:FREE?
Example
:SYST:LKEY:WAV:FREE?
or
:SYST:LIC:WAV:FREE?
Notes The second form: :SYSTem:LICense[:FPACk]:WAVeform:FREE is provided for consistency
with the style of Keysight signal sources. You can use either one
Slots Used Query (Remote Query Only)
Returns the number of license slots used.
Remote
Command
:SYSTem:LKEY:WAVeform:USED?
or
:SYSTem:LICense[:FPACk]:WAVeform:USED?
2013 Short Range Comms & IoT Mode User's &Programmer's Reference
To Next Page
Loading...
Need help?
General
