3 Short-Range Comms & IoT Mode
3.2 Modulation Analysis Measurement
Remote
Command
:CALCulate:EVM:MARKer[1]|2|...|12:MODE POSition | DELTa | FIXed | OFF
:CALCulate:EVM:MARKer[1]|2|...|12:MODE?
Example
:CALC:EVM:MARK2:MODE POS
:CALC:EVM:MARK2:MODE?
Couplings The marker addressed by this command becomes the selected marker on the front panel
Preset OFF (all markers)
State Saved The marker control mode (Normal, Delta, Fixed, Off) and X Axis value are saved in instrument state
Range Normal|Delta|Fixed|Off
Delta Marker (Reset Delta)
Pressing this control is exactly the same as pressing the “Delta” selection on the
Marker Mode radio button. The selected marker becomes a Delta Marker. If the
selected marker is already a Delta marker, the reference marker is moved to the
current position of the selected marker, thus resetting the Delta to zero.
Marker Settings Diagram
The Marker Settings Diagram lets you configure the Marker system using a visual
utility.
Short Range Comms & IoT Mode User's &Programmer's Reference 259
To Next Page
Loading...
