3 Short-Range Comms & IoT Mode
3.2 Modulation Analysis Measurement
Preset Depends on trace data
State Saved Saved in instrument state
Min/Max -9.9E+37/9.9E+37
Annotation The reference value is displayed above the graticule with the title “Ref Value”
Scale/Div
Controls the Y scale per division of the selected trace.
Remote Command
:DISPlay:EVM:WINDow[1]|2|...|6:Y[:SCALe]:PDIVision <real>
:DISPlay:EVM:WINDow[1]|2|...|6:Y[:SCALe]:PDIVision?
Example
:DISP:EVM:WIND3:Y:PDIV 10
set the Y scale/div of the third window to 10
:DISP:EVM:WIND3:Y:PDIV?
query the Y scale/div of the third window
Preset Depends on trace data
State Saved Yes
Min/Max -9.9E+37/9.9E+37
Annotation Upper left corner of trace grid, same grey as grid
Ref Position
Positions the reference level at the top, center, or bottom of the Y Scale display.
Changing the reference position does not change the reference level value.
Remote
Command
:DISPlay:EVM:WINDow[1]|2|...|6:Y[:SCALe]:RPOSition TOP | CENTer | BOTTom
:DISPlay:EVM:WINDow[1]|2|...|6:Y[:SCALe]:RPOSition?
Example
:DISP:EVM:WIND3:Y:RPOS TOP
set the Y ref position of the third window to TOP
:DISP:EVM:WIND3:Y:RPOS?
query the Y ref position of the third window
Preset Depends on trace data
State Saved Saved in instrument state
Range Top | Ctr | Bot
202 Short Range Comms & IoT Mode User's &Programmer's Reference
To Next Page
Loading...
