EasyManua.ls Logo

Keysight N9010B - 3.4.8.4 Demod; Data Analysis; Modulation Analysis; Chip Clock Error Compensation

Keysight N9010B
2530 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Short-Range Comms & IoT Mode
3.4 HRP UWB Demodulation Measurement
Min Search Offset + Search Length
Max Depends on System BW
3.4.8.4 Demod
Contains parameters for the UWB PHY layer.
Data Analysis
Enables analysis of the data portion of the frame (PHR+PSDU) to calculate the
power metrics and NRMSE result.
Remote
Command
[:SENSe]:HUWB:DATA:ANALysis[:STATe] OFF | ON | 0 | 1
[:SENSe]:HUWB:DATA:ANALysis[:STATe]?
Example
:HUWB:DATA:ANAL ON
:HUWB:DATA:ANAL?
Couplings Grayed-out when "STS Packet Configuration" on page 502 is After SFD, no data (3)
Preset
ON
State Saved Yes
Range
OFF|ON
Modulation Analysis
Enables the demodulation process to calculate NRMSE result.
Remote
Command
[:SENSe]:HUWB:MODulation:ANALysis[:STATe] OFF | ON | 0 | 1
[:SENSe]:HUWB:MODulation:ANALysis[:STATe]?
Example
:HUWB:MOD:ANAL ON
:HUWB:MOD:ANAL?
Preset
ON
State Saved Yes
Range
OFF|ON
Chip Clock Error Compensation
Enables or disables the internal adjustment in the timing of the chip clock.
Remote
Command
[:SENSe]:HUWB:COMPensation:CCLock[:STATe] OFF | ON | 0 | 1
[:SENSe]:HUWB:COMPensation:CCLock[:STATe]?
Short Range Comms & IoT Mode User's &Programmer's Reference 515

Table of Contents

Other manuals for Keysight N9010B

Related product manuals