Keysight N9010B - 7.3.61 Mass Storage Device Copy (Remote Command Only); 7.3.62 Mass Storage Delete (Remote Command Only); 7.3.63 Mass Storage Data (Remote Command Only)

7 Save/Recall/Print
7.3 Save
7.3.61 Mass Storage Device Copy (Remote Command Only)
Transfers data to/from a file and a peripheral device.
Remote
Command
:MMEMory:COPY:DEVice <source_string>,<dest_string>
<source_string> and <dest_string> must be valid logical paths
Notes The strings must be a valid logical path or a valid device keyword. If dest_string is a device
keyword, the data is copied from the source file to the device. If source_string is a device
keyword, the data is copied to the source file from the device
Valid device keywords are:
SNS (smart noise source)
An error is generated if the file or device is not found
7.3.62 Mass Storage Delete (Remote Command Only)
Remote
Command
:MMEMory:DELete <file_name>[,<directory_name>]
<file_name> and <directory_name> must be valid logical paths
Example
:MMEM:DEL "Screen_0000.png"
Notes If no directory is specified, uses the current directory
Removes a file from the specified directory. <file_name> specifies the file name to be removed. This
command generates an “access denied” error if the file is in a restricted folder (for example,
C:\Windows) and you do not have Power User or Administrator privileges
7.3.63 Mass Storage Data (Remote Command Only)
Creates a file containing the specified data or queries the data from an existing file.
Remote
Command
:MMEMory:DATA <file_name>, <data>
<file_name> must be a valid logical path
:MMEMory:DATA? <file_name>
Example
:MMEM:DATA? "MyFile.txt"
Notes If no directory is specified, uses the current directory
The command form :MMEMory:DATA <file_name>,<data> loads <data> into the file
<file_name>. <data> is in 488.2 block format. <file_name> is string data
The response to :MMEMory:DATA? <file_name> is the associated <data> in block format
Short Range Comms & IoT Mode User's &Programmer's Reference 2307