6 Input/Output
6.1 RF Source
Only Signal Studio waveform has a unique ID, which is a positive number. User-generated waveforms
have no unique ID. If no waveform is stored in the specified slot, returns “0”
Locked Waveform Name List Query (Remote Query Only)
Returns the waveform name list of locked.
Remote
Command
:SOURce:RADio:ARB:MPLicensed:NAME:LOCKed?
Example
:SOUR:RAD:ARB:MPL:NAME:LOCKed?
< "CDMA2K_27.wfm","GSM_MCS1.WFM","c2kWfm.wfm"
Locked Waveform Unique ID List Query (Remote Query Only)
Returns the waveform unique id list of locked.
Remote
Command
:SOURce:RADio:ARB:MPLicensed:UID:LOCKed?
Example
:SOUR:RAD:ARB:MPL:UID:LOCKed?
< "2996927136","3812603511","3710986266"
Notes Each Signal Studio waveform has a unique id recorded in header. If the unique ids are same, that means
they are the same waveform. For this reason, in addition to the locked waveform name list query , there
is also a locked waveform unique id list query
Multi-Pack License multi-module control state (Remote Command Only)
When ON, multi-pack license operations (such as adding/locking/replacinwaveform
etc.) from TRXs other than TRX1 are allowed. If OFF, only TRX1 is allowed to operate
multi-pack license, while other TRXs are only able to show the related multi-pack
license information.
Remote
Command
:SERVice[:PRODuction]:SOURce:MCONtrol:MPLicense[:STATe] ON | OFF | 1 | 0
:SERVice[:PRODuction]:SOURce:MCONtrol:MPLicense[:STATe]?
Example
:SERV:SOUR:MCON:MPL OFF
Notes Only effective in modular-based OBTs, such as EXM
Preset
OFF
Range
ON|OFF
2015 Short Range Comms & IoT Mode User's &Programmer's Reference
To Next Page
Loading...
Need help?
General
