Keysight N9010B - 6.1.13.6 Sync Connected (Remote Query Only); 6.1.14 Source Preset

To Next Page

To Previous Page

6 Input/Output

6.1 RF Source

6.1.13.6 Sync Connected (Remote Query Only)

Lets you query the state of synchronization.

Remote

Command

:SOURce:SYNC:CONNected?

Example

:SOUR:SYNC:CONN?

Returns: 1 when synchronization is established, 0 when synchronization is stopped

6.1.14 Source Preset

Lets you preset the source settings to their default values.

Remote Command

:SOURce:PRESet

Example

:SOUR:PRES

2025 Short Range Comms & IoT Mode User's &Programmer's Reference

Other manuals for Keysight N9010B