Keysight N9010B - Page 2378

8 Trigger
8.3 Gate Settings
Backwards
Compatibility
SCPI
[:SENSe]:SWEep:EGATe:POLarity NEGative | POSitive
[:SENSe]:SWEep:EGATe:POLarity?
This backwards-compatibility command is available in Modes that support Gate
Polarity parameter
[:SENSe]:SWEep:TIME:GATE:POLarity
This backwards-compatibility command is available in SA and SCPILC Modes
ESA compatibility
Preset
HIGH
Backwards Compatibility
SCPI
[:SENSe]:SWEep:TIME:GATE:LEVel HIGH | LOW
[:SENSe]:SWEep:TIME:GATE:LEVel?
ESA compatibility
Short Range Comms & IoT Mode User's &Programmer's Reference 2378