Keysight N9010B - How to Return Your Instrument for Service

Table Of Contents
Detector/Sweep 1455
Frequency Range 1455
Enabled 1456
Start Freq 1456
Stop Freq 1456
Center Frequency 1456
Span 1456
Sweep Time 1456
Points 1457
Detector 1 1458
Detector 2 1459
Limits 1460
Frequency Range 1460
Enabled 1460
Start Freq 1460
Stop Freq 1460
Center Frequency 1460
Span 1461
Abs Start Limit 1461
Abs Stop Limit 1462
Peak Excursion 1463
Pk Threshold 1464
Meas Setup Summary Table 1464
Auto Couple 1464
Meas Preset 1466
Fast Spurious Meas (Remote Command only) 1466
3.10.8.2 Meas Standard 1467
Radio Standard 1467
Preset to Std 1468
3.10.8.3 Advanced 1470
Noise Floor Extension 1470
3.10.8.4 Global 1474
Global Center Freq 1474
Global EMC Std 1475
Restore Defaults 1475
3.10.9 Sweep 1476
3.10.9.1 Sweep/Control 1476
Sweep/Measure 1476
Restart 1478
Pause/Resume 1480
Abort (Remote Command Only) 1481
3.10.9.2 Sweep Config 1481
Sweep Type 1481
Sweep Time Rules 1482
3.10.10 Trace 1483
Short Range Comms & IoT Mode User's &Programmer's Reference 43