3 Short-Range Comms & IoT Mode
3.3 LoRa (CSS) Demodulation Measurement
Remote Command
:DISPlay:LORA:RTRace[:STATe] OFF | ON | 0 | 1
:DISPlay:LORA:RTRace[:STATe]?
Example
:DISP:LORA:RTR OFF
:DISP:LORA:RTR?
Dependencies An error message will appear when this control is switched on if there was no reference trace stored.
The control remains off
The stored reference trace will be purged when either the time, the offset or the points number of the
demod waveform changes. And the state of “show reference” will be switched off
Preset
OFF
State Saved Saved in instrument state
Range On|Off
Short Range Comms & IoT Mode User's &Programmer's Reference 431
To Next Page
Loading...
