Keysight N9912A - Page 340

4 Keysight N9912-90001 User’s Guide
Index
N
NA Factory Cal
, 18-22
NA mode
calibration
, 7-1
settings, 5-3, 5-5
name files, 17-3
network analyzer, 5-1
normalization, 7-7
numeric values, 2-14
numeric values, entering, 2-14
O
O, S, L cal
, 7-5
O, S, L calibration, 7-5
Occupied Bandwidth, 8-40
old data indicator (*), 8-35
Opt 010, 6-1
option
010
, 6-1
option 312 , channel
scanner
, 15-1
options
installing
, 18-11
Output Power
NA Mode
, 5-14, 14-5
output power, 3-9, 3-10, 5-14,
14-6
overpowering, avoid, 2-5
overview, 1-1
P
packaging markings
, 21-13
panel, front, 2-7
panel, right side, 2-10
panel, top, 2-10
Parameter Conversion, 5-3
peak
criteria
, 16-10, 16-11
excursion, 16-11
threshold, 16-11
perform
single sweep while in
Hold
, 18-2
Phase Offset, 5-10
Playback Configuration, 9-10,
9-14
Points SA mode, 8-27
points, SA mode, 8-27
Port Extensions, 5-16
power requirements, 2-1
power requirements for the
AC/DC adapter
, 2-1
power sensor input, 2-5, 2-11
Power Spectral Density, 8-39
power, maximum, 2-5
Preferences, 18-7
preferences, 18-7
prefixes for file names, 17-10
preparing for initial use, 2-1
preset, 18-3
preset settings, 18-3
Printing, 17-11
printing, 17-11
protection, high
temperature
, 2-4
protective functions of the
battery
, 20-2
Pulse Measurements, 13-1
Q
Quick Settings
, 5-6
quick settings, 3-4
QuickCal, 7-3
R
Radio Standard
, 8-6
recall an *.sta file, 17-4
recalling files, 17-4
Record Source, 9-13
Record/Playback, 9-7
Recording Configuration, 9-11
reference marker, 16-4, 16-12
reference, external
frequency
, 18-15
Reflection Mode, 10-1
resolution, 2-12, 3-8
NA Mode, 5-13
Resolution Bandwidth SA
mode
, 8-20
resolution bandwidth, SA
mode
, 8-20
Resolution, NA mode, 5-13
Restart, 8-27
restart, 8-27
return loss measurements, CAT
mode
, 3-12
review connector care, 2-15
reviewconnector care, A-1
RRC Weighting, 8-46
S
S11 measurements, NA
mode
, 5-3
SA mode
settings
, 8-4, 9-2
units, 8-8
SA Mode Units, 8-8
Safety Considerations, 21-1
save
display setting as
preferences
, 18-8
file, 17-2
save and recalling files, 17-2
Save Preferences, 18-8, 18-9
Scale Settings
NA Mode
, 5-8
scale settings, NA mode, 5-8
scale, setting, 3-5
screen cleaning, 2-9
screen front panel, 2-12
Security Level, 18-16
select
language
, 18-9
sending SCPI commands,
mini-USB port
, 19-1
service diagnostics, 18-22
Sessions, 9-7
set
display colors
, 18-5
display units, 11-6
output power, 14-5
settings
CAT mode
, 3-3, 10-2, 10-3
DTF, 4-19, 5-3, 6-3
DTF mode, 4-19
language, 18-9
preset, 18-3
SA mode, 8-4, 9-2
VVM mode, 14-4
smoothing, 3-7
Source Control with USB
Power Meter
, 11-4
S-parameters, 5-3
Spectrogram Display, 9-2
spectrogram display, 9-2
spectrum analyzer mode, 8-1,
9-1, 10-1, 11-1, 12-1
stand-by mode, 2-3
Startup Mode, 18-9
static charge, dissipate, 2-6
Step Detection Mode, 11-8