Kidde Fire Systems ARIES NETLink

Configuration and Programming
P/N 06-237058-001 3-51 February 2012
Figure 3-40. ARIES NETLink Test Menu Functions (Cont’d - Fig. 4 of 5)
4. TEST
9.DIAGNOSTICS
8. Find Dup Address
SLC Loop Selection
ENTER SLC LOOP NUMBER (1-8) _

Enter Device Address *__  (000-255)
3. SLC RESISTANCE
7. FIND GROUND FAULT
Press Backspace to Exit
*
4. SLC Comm Value
SLC Communication Value
ENTER SLC MODULE NUMBER (1-8) _

SLC Devices From *__ To ___  (1-255)
ENTER SLC MODULE NUMBER (1-8) _ 
5. SLC LOOP DEBUG
6. SLC COMM DEBUG
7. SLC DEBUG OFF
1. RESET MODULES
ENTER PHYSICAL SLOT RANGE: * _ TO _ 
ENTER 00 TO 00 FOR BROADCAST RESET
ENTER SLC MODULE NUMBER (1-8) _ 
ENTER SLC MODULE NUMBER (1-8) _ 
ENTER SLC MODULE NUMBER (1-8) _ 
2. RESET CONTROL MOD
1. ALL
2. MAIN DISPLAY
3. LAM
4. RDCM
5. ATM
ENTER THE LAM NUMBER (01-16) : * 
ENTER THE RDCM NUMBER (01-15) : * 
ENTER THE ATM NUMBER (01-16) : * 
11
10