Kinco JD Series - Page 123

Kinco JD 伺服系列使用手册
123
Kinco JD Series Servo User Manual
c. Address setting
There are three address types in HMI software which are corresponding to the data length of the objects in
JD servo.These address types are 08(8 bits),10(16 bits) and 20 (32 bits).The format of the address is
Index.Subindex.Following figure is an example for using object 60FF0020(Target velocity)
(2)HMI controls multiple JD servo (D05.15 must set as 1)
a、Wiring diagram