Kinco JD Series - Appendix 3:Example for RS232 Communication

Kinco JD 伺服系列使用手册
122
Kinco JD Series Servo User Manual
Appendix 3:Example for RS232 Communication
1.Communication between JD servo and Kinco HMI.
Kinco MT4000 and MT5000 series HMI can communicate with RS232 port of JD servo.Users can set
internal parameters of JD servo and display the status of JD servo.Kinco HMI can communicate with single
JD servo,and also can communicate with multiple JD servo via RS232.
(1) HMI control single JD servo
a．Wiring diagram
b. Communication parameters setting
It needs to choose Kinco Servo Series driver in HMI.The parameters setting are shown in following figure.