Kinco JD Series - Driver Config

Kinco JD 伺服系列使用手册
34
Kinco JD Series Servo User Manual
Step 3:Double click the object to add this object into “Basic operate” menu.
Step 4:If you need to delete the object in the menu.Right click the object and select “del”to
delete the object.If you need to know more details of the object,then right click the object
and select “help” to show the details.
5.4.6 Driver Config
In this menu,it is used to set the parameters such as User Password,Brake resistor,RS232 communication
and so on.