Kinco JD Series - Data Object

Kinco JD 伺服系列使用手册
33
Kinco JD Series Servo User Manual
5.4.5 Data Object
In this menu,it can be used to query the address and descriptions of all the objects in JD driver.As
shown in above picture,there are Index,Subindex address and the name of the objects on the left
side.On the right side,there are the descriptions of the object.
Example 5-3：Use JD-PC Software to Add an Object
Requirement:Add an address in any menu.Here we will add “CANopen baudrate” in “Basic Operate”.
Step 1:Open “Basic Operate”,then righ click in the window of “Basic Operate”.Select
“add”,then it will popup a window of “Data Object”.
Step 2:Enter “baudrate” in “Find what”,then click “Find next”.It will jump to the object
“CAN_Baudrate” whose index address is 2F81.There are the descriptions of this object in the
rightside. As shown in following figure.