Kinco JD Series - I;O Port

Kinco JD 伺服系列使用手册
30
Kinco JD Series Servo User Manual
5.4.3 I/O Port
In this menu,it is used to set the functions and polarity of I/O ports,monitor the status of I/O ports and simulate
the I/O ports.
Example 5-2：Use JD-PC software to set the functions of I/O port
Requirement:Cancel the functions of DIN1,DIN3 and DIN5.Set DIN2 as default reset,DIN4 as emergency
stop and OUT2 as Reference found.Others are set as default.
Step 1:Click the button beside DIN1.Cancel the function “Driver enable” in the popup
window as following figure,then click OK.