Kinco JD Series - 7.2 Digital Output

Kinco JD 伺服系列使用手册
68
Kinco JD Series Servo User Manual
Fig.7-5 PNP wiring diagram (to the controller that supports high level output)
7.2 Digital Output
7.2.1 Polarity Control on Digital Output Signals
Note:All the digital output are normally open by default.
Table 7-14 Variables for setting simplified IO polarity
Numeric
Display
Variable Name
Meaning
d3.08
Dio_Polarity
Sets IO polarity
Dio_Polarity (simplified IO polarity settings) is used to set the polarity of valid digital output signals. The
number “1” indicates normally open, and “0” indicates normally close.Default is 1.
Example 7-6：Polarity setting for digital output OUT1
7.2.1.1：Use panel to change polarity
Table 7-15 Polarity setting for digital output OUT1(Default is ready function)
①
②
③
④