Kinco JD Series - Error Control

Kinco JD 伺服系列使用手册
41
Kinco JD Series Servo User Manual
5.4.9 Error Control
This menu is used to monitor the current error information.As shown in following figure,The
Hex data is the same error code as shown in LED display on servo driver.The small box is used
to choose whether to shield error or not.There is error when the lamp is red.The text is the
descriptions of error.About more details please refer to chapter 11.
Note:Please be careful for shielding error,and not all the errors can be shielded.