Kinco JD Series - Page 26

Kinco JD 伺服系列使用手册
26
Kinco JD Series Servo User Manual
4．Enter communication property interface.Set the parameters like COM,Baudrate,Driver ID corresponding to
the actual value in servo driver.Then click Comm Status button 。
If it uses CAN connection,set the parameters like Baudrate,Driver ID.Then click Comm Status
button .
5.Check the informations in the lower-right side.If the informations are like “Comm Status:Open COM1
38400” and the Comm Status turns green,it means JD-PC software is online successfully.