Kodak DirectView CR 850 - 32005 - Communications Error between MCPU and SSC BOARDS

DIAGNOSTICS Error Codes
10DEC05
DG4825-1
Page
111 of 180
32005 - Communications Error between MCPU and SSC BOARDS
Cause 1: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action: Do the checkout for the MOTION SYSTEM CONTROL BOARD A1.
Cause 2: The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Action: Do the checkout for the SLOW SCAN CONTROLLER BOARD A6 and COIL
BOARD A7.
Description: The SLOW SCAN CONTROLLER BOARD A6 did not return a correct
response to a command from the MOTION SYSTEM CONTROL BOARD
A1. The command is sent again.
Cause 1: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action: Do the checkout for the MOTION SYSTEM CONTROL BOARD A1.
Cause 2: The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Action: Do the checkout for the SLOW SCAN CONTROLLER BOARD A6 and COIL
BOARD A7.