Kodak DirectView CR 850 - Latch;Unlatch Cam; 11001 - DUPLEX CAM DID Not Move to Home Position; 11002 - DUPLEX CAM DID Not Move to PINCH Position; 11003 - DUPLEX CAM DID Not Move to CLAMP;UNLATCH Position

DIAGNOSTICS Error Codes
10DEC05
DG4825-1
Page
66 of 180
LATCH/UNLATCH CAM
11001 - DUPLEX CAM did not move to Home Position
11002 - DUPLEX CAM did not move to “PINCH” position
11003 - DUPLEX CAM did not move to “CLAMP/UNLATCH” position
11004 - DUPLEX CAM did not move to “UNCLAMP/LATCH” position
11005 - DUPLEX CAM did not move to “UNPINCH” position
11006 - CAM OUTER SENSOR S11 did not detect position of DUPLEX CAM
11007 - CAM INNER SENSOR S10 did not detect Home Position for
DUPLEX CAM
Cause: The DUPLEX CAM malfunctioned.
Action: Do the checkout for the CASSETTE HANDLING AY.
Cause: The DUPLEX CAM malfunctioned.
Action: Do the checkout for the CASSETTE HANDLING AY.
Cause: The DUPLEX CAM malfunctioned.
Action: Do the checkout for the CASSETTE HANDLING AY.
Cause: The DUPLEX CAM malfunctioned.
Action: Do the checkout for the CASSETTE HANDLING AY.
Cause: The DUPLEX CAM malfunctioned.
Action: Do the checkout for the CASSETTE HANDLING AY.
Cause: The DUPLEX CAM malfunctioned.
Action: Do the checkout for the CASSETTE HANDLING AY.
Cause: The DUPLEX CAM malfunctioned.
Action: Do the checkout for the CASSETTE HANDLING AY.