Kodak DirectView CR 850 - 55110 - Could Not Determine What Product We Are Running on; 55111 - the Options Diskette Is Not Valid for this Product; 55112 - Error Obtaining Adapter Name on Pentium 4 Class Machine; 55113 - Error Obtaining MAC Address for Card Name Specified in

DIAGNOSTICS Error Codes
10DEC05
DG4825-1
Page
118 of 180
55110 - Could not determine what product we are running on
55111 - The Options Diskette is not valid for this product
55112 - Error obtaining Adapter Name on Pentium 4 class machine
Note
This error does not display on a Pentium III PROCESSOR.
55113 - Error obtaining MAC address for card name specified in
AdapterName in General Equipment on Pentium 4 class machine
Note
This error does not display on a Pentium III PROCESSOR.
Cause: The correct configuration for this CR 825/850 SYSTEM was not provided.
Action: 1. Boot the SYSTEM.
2. Install the OPTIONS DISKETTE again.
Cause: The OPTIONS DISKETTE is not correct for the CR 825/850 SYSTEM.
Action: 1. Obtain the correct OPTIONS DISKETTE.
2. Install the OPTIONS DISKETTE again.
Cause: The correct configuration for this CR 825/850 SYSTEM was not provided.
Action: 1. Boot the SYSTEM.
2. Install the OPTIONS DISKETTE again.
Cause: The correct configuration for this CR 825/850 SYSTEM was not provided.
Action: 1. Boot the SYSTEM.
2. Install the OPTIONS DISKETTE again.