Kodak DirectView CR 850 - 10017 - Eject CASSETTE: Retry Attempt; 10019 - Eject CASSETTE: Timeout Error

DIAGNOSTICS Error Codes
10DEC05
DG4825-1
Page
62 of 180
10017 - Eject CASSETTE: Retry attempt
10019 - Eject CASSETTE: Timeout error
Description: The CASSETTE LOAD SENSOR S2 did not clear when the DRIVE
ROLLERS started to eject the CASSETTE.
Cause 1: The CASSETTE LOAD SENSOR S2 operates correctly, but an obstruction
occurred.
Action: Check:
• DRIVE ROLLERS rotate freely
• CASSETTE LOAD SENSOR S2 for obstructions
• adjustment of the SLED CAM FOLLOWER
Cause 2: The CASSETTE LOAD SENSOR S2 malfunctioned.
Action: Check:
• status of the CASSETTE LOAD SENSOR S2 - use Individual Component
Control
• LED DS21 on the MOTION SYSTEM CONTROL BOARD A1 changes status
• power to the CASSETTE LOAD SENSOR S2
• condition of the EMITTER and DETECTOR of the CASSETTE LOAD SENSOR
S2
Description: The CASSETTE LOAD SENSOR S2 did not clear in the correct time
when the DRIVER ROLLERS ejected the CASSETTE
Cause 1: The CASSETTE LOAD SENSOR S2 operates correctly, but an obstruction
occurred.
Action: Check:
• DRIVE ROLLERS rotate freely
• CASSETTE LOAD SENSOR S2 for obstructions
• adjustment of the SLED CAM FOLLOWER