54
Selecting and saving Performances
Saving your settings to a Performance
4 Select a bank and Performance location in memory, where you would like to save the
Performance.
5 When you have edited the name to the Performance, and selected the target location,
touch OK to save the Performance to memory (or cancel to stop the operation).
Warning: Saving a Per-
formance to an already used
location overwrites any exist-
ing data at that location. The
old data are lost. Make a
backup of all your important
data.
To select the target bank and
Performance location, select the
bank and Performance parame-
ters, and use the VALUE controls.
A)
B)
The selected Perfor-
mance location is high-
lighted. Touch a
Performance’s name to
select it.
Touch one of the side tabs to select a
different Performance bank.
Touch one of the lower tabs to select
a different Performance page.
or…
Note: A Performance
can be saved to an
‘Empty’ location. An
‘Empty’ locations cur-
rently contains no data.
To Next Page
Loading...
Need help?
General
