248
Media edit mode
Load
Loading a single bank
You can load a single bank of User data (User Sounds, User
Styles, Performances) with a single operation. A bank corre-
sponds to a STYLE SELECT or PERFORMANCE/SOUND
SELECT button.
1. If loading from an external device, connect the device to
one of the USB Host ports.
2. Select the source device, by using the Device pop-up menu.
When device is selected, its content will appear in the dis-
play.
3. If the folder you are looking for is inside another folder,
select this latter and touch the Open button to open it.
Touch the Close button to go back to the parent folder.
4. Select the “.SET” folder containing the data you wish to
load, and touch Open to open the “.SET” folder. A list of
User data appears (Global, Performance, SongBook,
Sounds, Style…).
5. Select the folder containing the type of data you are looking
for, and touch Open to open the selected folder. A list of
User (and Favorite Style) banks appears.
6. Select the bank you are looking for, and touch Load to con-
firm the selection. A dialog box appears, asking you to
select one of the available User (or Favorite Style) banks in
memory.
In the page above, the previously selected Style bank will be
loaded into the bank 1 (USER1 button) in memory. The
existing Styles in memory will be deleted and overwritten.
7. Select the target bank, and touch OK to load the source
bank.
Warning: After confirming, all User data contained in the
bank in memory is deleted.
Note: If Sounds or Drum Kits based on external PCM sam-
ples are deleted, choose the “Delete” command from the page
menu of the Sampling mode to delete the unused samples (see
the “Advanced Edit” addendum in the Accessory CD).
Note: If you are loading a bank of Sounds, and one or more
Sounds or Drum Kits use an external PCM sample, the sam-
ples are automatically loaded (unless they are already in
memory). This way, all needed samples are always loaded
together with the Sounds or Drum Kits making use of them.
See also “PCM Autoload” and “Load PCM button” on page
page 258.
Loading a single item
You can load a single User (or Favorite Style) item with a single
operation.
1. If loading from an external device, connect the device to
one of the USB Host ports.
2. Select the source device, by using the Device pop-up menu.
When device is selected, its content will appear in the dis-
play.
3. If the folder you are looking for is inside another folder,
select this latter and touch the Open button to open it.
Touch the Close button to go back to the parent folder.
4. Select the “.SET” folder containing the data you wish to
load, and touch Open to open the “.SET” folder. A list of
User data appears (Global, Performance, SongBook,
Sounds, Style…).
5. Select the folder containing the type of data you are looking
for, and touch Open to open the selected folder. A list of
User (or Favorite Style) banks appears.
To Next Page
Loading...
Need help?
General
