KTM 690 SMC R User Manual

22 TECHNICAL DATA 178
Standard 20 clicks
Sport 15 clicks
Full load capacity 15 clicks
Rebound damping
Comfort 20 clicks
Standard 15 clicks
Sport 10 clicks
Full payload 10 clicks
Spring preload 20 mm (0.79 in)
Spring rate
Medium (standard) 80 N/mm (457 lb/in)
Hard 85 N/mm (485 lb/in)
Spring length 220 mm (8.66 in)
Gas pressure 10 bar (145 psi)
Static sag 20… 25 mm (0.79… 0.98 in)
Riding sag 70… 80 mm (2.76… 3.15 in)
Fitted length 395 mm (15.55 in)
Shock absorber fluid ( p. 185) SAE 2.5
22.9 chassis tightening torques
Screw, chain guard EJOT 2 Nm (1.5 lbf ft) –
Screw, combination instrument EJOT 1 Nm (0.7 lbf ft) –
Screw, license plate holder, bottom EJOT 3 Nm (2.2 lbf ft) –
Screw, side cover on spoiler EJOT 1 Nm (0.7 lbf ft) –

KTM 690 SMC R Specifications

General

Engine Type	Single-cylinder, 4-stroke
Bore x Stroke	105 mm x 80 mm
Compression Ratio	12.7:1
Starter	Electric starter
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Cooling System	Liquid cooled
Frame	Chromium-Molybdenum steel trellis frame, powder coated
Front Wheel	3.50 x 17"
Rear Wheel	5.00 x 17"
Front Tire	120/70 ZR 17
Rear Tire	160/60 ZR 17
Seat Height	890 mm
Power	55 kW (74 hp)
Torque	73.5 Nm
Front Suspension	WP APEX 48
Rear Suspension	WP APEX with Pro-Lever linkage
Front Brake	Single 320 mm disc, 4-piston caliper
Rear Brake	Single 240 mm disc, 1-piston caliper
ABS	Bosch 9.1 MP (lean angle sensitive)
Fuel Tank Capacity	13.5 liters
Dry Weight	147 kg