KTM 690 SMC R User Manual

23 SUBSTANCES 183
Brake fluid DOT 4 / DOT 5.1
Standard/classification
– DOT
Guideline
– Use only brake fluid that complies with the specified standard (see specifications on the container) and that exhibits the corresponding
properties.
Recommended supplier
Castrol
– RESPONSE BRAKE FLUID SUPER DOT 4
Motorex
®
– Brake Fluid DOT 5.1
Coolant
Guideline
– Only use high quality coolant with corrosion inhibitor for aluminum motors (even in countries with high temperatures). Using inferior
antifreeze can result in corrosion and foaming.
Mixture ratio
Antifreeze protection: −25… −45 °C (−13…
−49 °F)
anti-corrosion/antifreeze
distilled water
Recommended supplier
Motorex
®
– COOLANT M3.0
Engine oil (SAE 10W/60) (00062010035)
Standard/classification
– JASO T903 MA ( p. 188)
– SAE ( p. 188) (SAE 10W/60)

KTM 690 SMC R Specifications

General

Engine Type	Single-cylinder, 4-stroke
Bore x Stroke	105 mm x 80 mm
Compression Ratio	12.7:1
Starter	Electric starter
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Cooling System	Liquid cooled
Frame	Chromium-Molybdenum steel trellis frame, powder coated
Front Wheel	3.50 x 17"
Rear Wheel	5.00 x 17"
Front Tire	120/70 ZR 17
Rear Tire	160/60 ZR 17
Seat Height	890 mm
Power	55 kW (74 hp)
Torque	73.5 Nm
Front Suspension	WP APEX 48
Rear Suspension	WP APEX with Pro-Lever linkage
Front Brake	Single 320 mm disc, 4-piston caliper
Rear Brake	Single 240 mm disc, 1-piston caliper
ABS	Bosch 9.1 MP (lean angle sensitive)
Fuel Tank Capacity	13.5 liters
Dry Weight	147 kg