KTM 690 SMC R User Manual

8 RIDING INSTRUCTIONS 46
8.1 Performing checks and vehicle care when preparing for use
Info
Before each use, check the state and roadworthiness of the vehicle.
Make sure that the vehicle is in perfect technical condition before use.
– Check the engine oil level. ( p. 144)
– Check the front brake fluid level. ( p. 91)
– Check the rear brake fluid level. ( p. 96)
– Check the front brake linings. ( p. 93)
– Check the rear brake linings. ( p. 98)
– Check the brake system function.
– Check the coolant level. ( p. 136)
– Check the chain for dirt. ( p. 78)
– Check the chain tension. ( p. 79)
– Check the tire condition. ( p. 108)
– Check the tire air pressure. ( p. 110)
– Check the settings of all controls and ensure that they can be operated smoothly.
– Check that the electrical equipment is functioning correctly.
– Check that baggage is correctly secured.
– Sit on the motorcycle and check the rear mirror setting.
– Check the fuel level.

KTM 690 SMC R Specifications

General

Engine Type	Single-cylinder, 4-stroke
Bore x Stroke	105 mm x 80 mm
Compression Ratio	12.7:1
Starter	Electric starter
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Cooling System	Liquid cooled
Frame	Chromium-Molybdenum steel trellis frame, powder coated
Front Wheel	3.50 x 17"
Rear Wheel	5.00 x 17"
Front Tire	120/70 ZR 17
Rear Tire	160/60 ZR 17
Seat Height	890 mm
Power	55 kW (74 hp)
Torque	73.5 Nm
Front Suspension	WP APEX 48
Rear Suspension	WP APEX with Pro-Lever linkage
Front Brake	Single 320 mm disc, 4-piston caliper
Rear Brake	Single 240 mm disc, 1-piston caliper
ABS	Bosch 9.1 MP (lean angle sensitive)
Fuel Tank Capacity	13.5 liters
Dry Weight	147 kg