KTM 690 SMC R User Manual

17 SERVICE WORK ON THE ENGINE 150
17.6 Installing the oil filter
102022-10
–
Insert oil filters

and

.
–
Oil the O-rings of the oil filter covers. Mount oil filter covers

and

.
– Mount and tighten the screws.
Guideline
Screw, oil filter cover M5x16 6 Nm (4.4 lbf ft)
17.7 Filling up with engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
102023-10
Main work
–
Remove filler plug with O-ring

from the clutch cover and add engine oil.
Engine oil 1.70 l (1.8 qt.) Engine oil (SAE 10W/60)
(00062010035) ( p. 183)
Alternative engine
oil
Engine oil
(SAE 10W/50)
( p. 184)
–
Refit plug with O-ring

and tighten it.

KTM 690 SMC R Specifications

General

Engine Type	Single-cylinder, 4-stroke
Bore x Stroke	105 mm x 80 mm
Compression Ratio	12.7:1
Starter	Electric starter
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Cooling System	Liquid cooled
Frame	Chromium-Molybdenum steel trellis frame, powder coated
Front Wheel	3.50 x 17"
Rear Wheel	5.00 x 17"
Front Tire	120/70 ZR 17
Rear Tire	160/60 ZR 17
Seat Height	890 mm
Power	55 kW (74 hp)
Torque	73.5 Nm
Front Suspension	WP APEX 48
Rear Suspension	WP APEX with Pro-Lever linkage
Front Brake	Single 320 mm disc, 4-piston caliper
Rear Brake	Single 240 mm disc, 1-piston caliper
ABS	Bosch 9.1 MP (lean angle sensitive)
Fuel Tank Capacity	13.5 liters
Dry Weight	147 kg