KurzB‐SeriesOperationsGuide 2–31
B‐SeriesFlowMeterDisplay Mode Options
Option 49 — Meter Event Code
ToviewtheEventCodemenuinDisplaymode:
1> PressD.
2> Press 2toinvoketheQuickJumpoption.
3> Press49fortheEventCodemenu,andthenpressE.
EVENT CODE
IN HEX: 0
TheEventCodepromptappears.Refertothe“Troubleshooting”chapterintheB‐Series
HardwareGuideforeventcodedescriptions.
4> PressHtoexit.
ThemainDisplaymode(DSP)promptappears.
Option 50 — Firmware Version
ToviewtheFirmwareVersionmenuinDisplaymode:
1> PressD.
2> Press 2toinvoketheQuickJumpoption.
3> Press50fortheFirmwareVersionmenu,andthenpressE.
FIRMWARE VERSION
MFT-B VER H2.16
TheFirmwareVersionpromptappears.TheHinfrontoftheversioninformation
designatesHARTsupport.
4> PressHtoexit.
ThemainDisplaymode(DSP)promptappears.