8-14
Setup and Registration (System Menu) > System Menu
Punch Waste Full Error Set what to do when the punch waste box becomes full during printing.
Value
Ignore: Printing continues without punching.
Display Error: Message to cancel printing is displayed.
Requires the optional Document Finisher and Punch Unit.
Paper Mismatch Error Set what to do when the selected paper size or type does not match paper size or
type loaded in the specified paper source while printing from the computer by
specifying the cassette or multipurpose tray.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Inserted Paper Mismatch Set what to do when it is detected that the multipurpose tray paper size setting does
not match the actual paper size that is fed.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Paper Jam before Staple The page from which printing is resumed when a paper jam occurs during a job with
stapling can be selected.
Value
Resume at Top of Page: Resume printing from the first page of the document.
Resume at Jammed Page: Resume printing from the page where the jam occurred.
Requires the optional Document Finisher.
Item Description
To Next Page
Loading...
