Kyocera ECOSYS P8060cdn - Page 260

8-40
Setup and Registration (System Menu) > System Menu
Enhanced WSD Set whether to use our proprietary web services.
*2
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
Enhanced WSD over SSL Set whether to use our proprietary web services over SSL.
*1, *2
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
IPP Selects whether to receive documents using IPP. To use the IPP protocol, set [IPP] to
[On], and set [SSL] to [Off]. In addition, select [Not Secure (IPP&IPPS)] on IPP
Security under Security Settings from the Command Center RX. The default port
number is 631.
*2
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
IPP over SSL To use the IPP protocol, set [IPP] and [SSL] to [On]. The default port number is
443.
*1, *2
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
HTTP Select whether to communicate using HTTP.
*2
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
Item Description