8-44
Setup and Registration (System Menu) > System Menu
Custom Setup The detailed settings for wireless LAN can be changed.
Network Name (SSID) Set the SSID (Service Set Identifier) of the wireless LAN to which the machine
connects.
Up to 32 characters can be entered.
Connection Mode Set the connection mode.
Value: Ad Hoc, Infrastructure
Ad Hoc: Directly communicates with the device without going through an access
point. This method cannot be used to connect to two or more devices.
Infrastructure: Performs communication through an access point.
Channel Set channel. Use [-] / [+] or the numeric keys to enter a number.
Value: 1 to 11
Network
Authentication
Select network authentication type. To select other options, open the device home
page from a computer.
Value: Open, Shared, WPA-PSK
*1
, WPA2-PSK
*1
Encryption Select encryption method. If the option other than [Disable] is selected, enter the
WEP key or the Preshared key. The setting values vary depending on the Network
Authentication setting. Select [Data Encryption].
When Network Authentication is set to [Open] or [Shared]:
Value: Disable, WEP
When Network Authentication is set to [WPA-PSK] or [WPA2-PSK]:
Value: TKIP
*2
, AES, Auto
*2
, Preshared Key
• If [WEP] is selected, enter the WEP key. Up to 26 characters can be entered.
• If [TKIP], [AES] or [Auto] is selected, enter the Preshared key. Enter the value in 8
to 64 characters.
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Network Authentication".
Item Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
