10-31
Troubleshooting > Troubleshooting
S
Message Checkpoints Corrective Actions
Reference
Page
SSD error. — An error has occurred on the
SSD. Job is canceled. Select
[End].
The error cords are as follows.
01: The amount of data that can
be saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, divide the file
into smaller files. If the error
occurs after the file is divided,
the SSD is damaged. Execute
[System Initialization].
04: Insufficient space on the
SSD to complete this operation.
Move data or delete unneeded
data.
Please be aware that when you
carry out initialization of the
system, the data saved in SSD
will be erased.
—
Staple is empty.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear
(page 8-50)
Has the staple cartridge holder
run out of staples?
If the staples are depleted, the
machine will stop and the
location of staple depletion will
be indicated on the screen.
Leave the machine on and
follow the instructions to replace
the staple case. Select
[Continue] to print without
stapling. Select [Cancel] to
cancel the job.
page 10-8
page 10-9
page 10-11
Staple is empty.
(Manual Staple)
Has staple cartridge holder A
run out of staples?
Add staples to staple cartridge
holder A.
page 10-9
Staple jam. — If a staple jam occurs, the
machine will stop and the
location of the jam will be
indicated on the screen. Leave
the machine on and follow the
instructions to remove the
jammed staple.
page 10-87
System error. — System error has occurred.
Follow the instructions on the
screen.
—
To Next Page
Loading...
Need help?
General
Weight and Dimensions
