Kyocera FS-C8520MFP - Page 379

2MY/2MZ-2
No. Content
Check procedure & check point
Remark 1
TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP,
TASKalfa 306i/FS-6530MFP, TASKalfa 256i/FS-6525MFP
F68X
An error is detected at the
Storage device control section
1) Format the HDD and check function. (U024 FULL formatting) (*1)
2) Execute the U021 Memory initializing to initialize the controller backup memory and check
function.
3) Replace the main board and check function.
4) Replace the HDD and check function. (*1)
5) Retrieve the USBLOG and contact the Service Administrative Division.
(*1) For the HDD standard model only.
*F684 is overwrite error with
the HDD security kit
F69X
F6AX
F6BX
F6CX
F6DX
F6EX
F6FX
F70X
F71X
F72X
F73X
F74X
F75X
An error is detected at the
HyPAS control section
1) Format the HDD and check function. (U024 FULL formatting) (*1)
2) Execute the U021 Memory initializing to initialize the controller backup memory and check
function.
3) Replace the main board and check function.
4) Replace the HDD and check function. (*1)
5) Retrieve the USBLOG and contact the Service Administrative Division.
(*1) For the HDD standard model only.
An error is detected at the
External Server management
section
1) Check the external server and check function.
2) Chekc the connection to the external server and check function.
3) Check the network settings and check function.
4) Replace the bridge board and check function.
5) Replace the main board and check function.
6) Retrieve the USBLOG and contact the Service Administrative Division.
*FieryOption related -
[Check the using CF]
Main board: YC4 (Where the CF is inserted.)
A certain part of the CF may be faulty. The frequency of faiure
occurrence is dependent on the frequency of access to the faulty
bit.
The main PWB may be faulty if the CF is not sensitive.
2-4-19