Kyocera FS-C8520MFP - Page 85

2MY/2MZ
1-3-45
U100 Setting:[Bias]
1. Select an item to be set.
2. Change the setting value using the +/- keys or numeric keys.
3. Press the start key. The value is set.
Setting:[Bias]
1. Select an item to be set.
2. Change the setting value using the +/- keys or numeric keys.
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt
copying mode (which is activated by pressing the system menu key).
Item No. Description
Display Description
Setting
range
Initial
setting
1st Manual adjustment value (1st) 0 to 250 145
2nd Manual adjustment value (2nd) 0 to 250 145
3rd Manual adjustment value (3rd) 0 to 250 145
4th Manual adjustment value (4th) 0 to 250 145
Default(1st) Manual adjustment base value (1st) 0 to 250 -
Default(2nd) Manual adjustment base value (2nd) 0 to 250 -
Default(3rd) Manual adjustment base value (3rd) 0 to 250 -
Default(4th) Manual adjustment base value (4th) 0 to 250 -
Display Description
Setting
range
Initial
setting
1st MC DC bias (1st) 0 to 250 145
2nd MC DC bias (2nd) 0 to 250 145
3rd MC DC bias (3rd) 0 to 250 145
4th MC DC bias (4th) 0 to 250 145