Kyocera KM-3050

2GN/2GP/2GR-2
1-3-67
U342
Setting the ejection restriction
Description
Sets or cancels the restriction on the number of sheets to be ejected continuously when the internal eject tray
is selected as the eject location.
Purpose
According to user request, sets or cancels restriction on the number of sheets.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: ON
Details of restriction (number of sheets to be ejected continuously after the start key is pressed)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U343
Switching between duplex/simplex copy mode
Description
Switches the initial setting between duplex and simplex copy.
Purpose
To be set according to frequency of use: set to the more frequently used mode.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: OFF
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
U345
Setting the value for maintenance due indication
Description
Sets when to display a message notifying that the time for maintenance is about to be reached, by setting the
number of copies that can be made before the current maintenance cycle ends.
When the difference between the number of copies of the maintenance cycle and that of the maintenance
count reaches the set value, the message is displayed.
This maintenance mode is effective for only Japanese specification.
Maintenance
item No.
Description
Display Description
ON Sets restriction on the number of sheets
OFF Cancels restriction on the number of sheets
Condition Number of sheets
When no optional ejection device is installed 250
When the job separator is installed 150
When the finisher is installed 100
Display Description
ON Duplex copy
OFF Simplex copy