Kyocera KM-3050

2GN/2GP/2GR-1
2-1-13
2-1-5 Transfer and separation sections
The transfer and separation section consists mainly of the transfer roller, separation electrode and drum separation claws.
A high voltage generated by the high-voltage transformer PWB (HVTPWB) is applied to the transfer roller for transfer
charging.
Paper after transfer is separated from the drum by applying separation bias that is output from the high-voltage trans-
former PWB (HVTPWB) to the separation electrode.
Figure 2-1-17 Transfer and separation sections
Figure 2-1-18 Transfer and separation sections block diagram
Drum
separation claws
Drum
Separation electrode
Transfer roller
THVDR
TC
SC
RHVDR
YC1-5
YC1-9
YC7-10
YC7-6
EPWB
HVTPWB
Drum
Separation
electrode
Transfer rolle
r