2GN/2GP/2GR-7
1-3-92
3. Press [OK].
4. Press [Change] of Media Type to select type of
paper and press [OK].
Type of paper: Plain, Rough, Vellum, Recycled,
Preprint, Bond, Color, Prepunched, Letterhead,
Thick, High Quality, Custom
Paper size and media type setup for MP tray
Select size and type of paper for MP Tray. Set up fre-
quentlyused size and type of paper before use.
1. Press [Next] of Original/Paper Setup, [Next] of MP
Tray Setting and then [Change] of Paper Size.
2. To detect paper size automatically, press [Auto] and
select Metric or Inch for Paper Size.
To select paper size, press [Standard Sizes 1],
[Standard Sizes 2], [Others] or [Size Entry] for
Paper Size.
Setting range
Standard Sizes 1
120 V specifications: Ledger, Legal, Letter,
Letter-R, Statement-R, 8.5 x 13.5", Oficio II,
Executive
220-240 V specifications: A3, B4, A4, A4-R, B5,
B5-R, A5-R, B6-R, A6-R, Folio
Standard Sizes 2
Select a standard size except that selected in
Standard Sizes 1.
120 V specifications: A3, B4, A4, A4-R, B5, B5-R,
A5-R, B6-R, A6-R, Folio, 8K, 16K, 16K-R
220-240 V specifications: Ledger, Legal, Letter,
Letter-R, Statement-R, 8.5 x 13.5", Oficio II,
Executive, 8K, 16K, 16K-R
Others
Select special standard sizes or custom sizes.
ISO B5, Envelope #10, Envelope #9, Envelope #6,
Envelope Monarch, Envelope DL, Envelope C5,
Envelope C4, Hagaki, Oufuku Hagaki, Youkei 4,
Youkei 2
If you select [Size Entry], enter X (horizontal) and
Y (vertical) dimensions using the [+]/[-].
Setting range
120 V specifications:
H: 5.83 to 17" (in 0.01" increments),
V: 3.86 to 11.69" (in 0.01" increments)
220-240 V specifications:
V: 98 to 297 mm (in 1 mm increments),
H: 148 to 432 mm (in 1 mm increments)
3. Press [OK].
4. Press [Change] of Media Type to select the type of
paper and press [OK].
Type of paper: Plain, Transparencies, Rough,
Vellum, Labels, Recycled, Preprint, Bond,
Cardstock, Color, Prepunched, Letterhead, Thick,
Envelope, High Quality, Custom 1-8
Paper type
Select weight for each type of paper.
1. Press [Next] of Original/Paper Setup and then
[Next] of Media Type Setting.
2. Press [Next] for the type to change weight.
3. Press [Change] of Media Weight.
4. Select the weight and press [OK].
Light/Normal 1/Normal 2/Normal 3/Heavy 1/
Heavy 2/Heavy 3/Extra Heavy
5. To change the duplex printing settings for Custom 1
(-8), press [Change] of Duplex, select [Prohibit] or
[Permit] and press [OK].
6. To change the name for Custom 1(-8), press
[Change] of Name to enter the name and press
[OK].
Names should be not more than 15 characters.
Default paper source
Select the default paper source from Cassette 1-4 and
MP tray.
NOTE: [Cassette 3] and [Cassette 4] are displayed when
the optional paper feeders or optional 3000-sheet paper
feeder is installed.
1. Press [Next] of Original/Paper Setup and then
[Change] of Default Paper Source.
2. Select default setting for paper cassette.
Cassette 1/ Cassette 2/Cassette 3/Cassette 4/Multi
Purpose Tray.
3. Press [OK].
Automatic detection of originals
Automatically detect originals of special or non-standard
size.
1. Press [Next] of Original/Paper Setup and then
[Next] of Original Auto Detect.
2. Press [A6] or [Hagaki] of A6/Hagaki.
Press [Off] or [On] of Folio.
Press [Off] or [On] of 11 x 15"
3. Press [OK].
Media for auto selection
Select default type of paper for auto paper selection.
1. Press [Next] of Original/Paper Setup and then
[Change] of Media for Auto Selection.
2. Select media type for paper selection.
All Media Type/Plain/Transparency/Rough/Vellum/
Labels/Recycled/Preprinted/Bond/Cardstock/Color/
Prepunched/Letterhead/Envelope/Thick/High Qual-
ity/Custom 1/Custom 2/Custom 3/Custom 4/Cus-
tom 5/Custom 6/Custom 7/Custom 8
3. Press [OK].
Paper source for cover
Select paper source for cover from Cassette 1-4 or MP
tray.
NOTE: [Cassette 3] and [Cassette 4] are displayed when
the optional paper feeders or optional 3000-sheet paper
feeder is installed.
1. Press [Next] of Original/Paper Setup and then
[Change] of Paper Source for Cover.
2. Select the paper source to load cover paper.
Cassette 1/ Cassette 2/Cassette 3/Cassette 4/Multi
Purpose Tray.
3. Press [OK].
To Next Page
Loading...
