Kyocera KM-3050

2GN/2GP/2GR-2
1-3-52
U240
Checking the operation of the finisher
Description
Turns each motor and solenoid of the 3000-sheet document finisher ON.
Purpose
To check the operation of each motor and solenoid of the 3000-sheet document finisher.
Method
1. Press the start key.
2. Select the item to be checked. The screen for executing each item is displayed.
Method: Checking the motor of the 3000-sheet document finisher
1. Select the item to be operated. The operation starts.
2. To stop operation, press the stop key.
Maintenance
item No.
Description
Display Description
FINISHER MOTOR Checking the motor of the 3000-sheet document finisher
FINISHER SOL Checking the solenoid of the 3000-sheet document finisher
MAIL BOX Checking the motor and solenoid of the mailbox
BOOKLET Checking the motor of the centerfold unit
Display Motor
FEED IN MOTOR M Paper entry motor (PEM) is turned on counterwise.
FEED IN MOTOR L Paper entry motor (PEM) is turned on clockwise.
CONV MOTOR H Paper conveying motor is turned on at high speed.
CONV MOTOR M Paper conveying motor is turned on at middle speed.
CONV MOTOR L Paper conveying motor is turned on at low speed.
EJECT MOTOR H Eject motor (EJM) is turned on at high speed.
EJECT MOTOR M Eject motor (EJM) is turned on at middle speed.
EJECT MOTOR L Eject motor (EJM) is turned on at low speed.
SUB PATH MOTOR H Relief path motor (RPM) is turned on counterwise.
SUB PATH MOTOR M Relief path motor (RPM) is turned on clockwise.
BUNDLE UP MOTOR Paper conveying belt motor 1 (PCBM1) is turned on.
BUNDLE DOWN MTR Paper conveying belt motor 2 (PCBM2) is turned on.
WIDTH TEST(A3) Side registration motor 1/2 (SRM1/2) is turned on.
WIDTH TEST(LD) Side registration motor 1/2 (SRM1/2) is turned on.
STAPLE FR MOTOR Staple shift motor 1 (STSM1) is turned on.
STAPLE S MOTOR Staple shift motor 2 (STSM2) is turned on.
STAPLE MOTOR Staple motor (STM) is turned on.
TRAY MOTOR Main tray motor (MTM) is turned on.
PUNCH MOTOR Punch motor (PUNM) is turned on.
PUDDLE MOTOR Paddle motor (PDM) is turned on.