Kyocera KM-3050

2GN/2GP/2GR
2-2-2
(2) Switches and sensors
Figure 2-2-2 Switches and sensors
1. Main power switch (MSW) ........................... Turns the AC power on and off.
2. Interlock switch (ILSW) ................................ Turns the AC power for the fuser heaters on and off.
3. Safety switch 1 (SSW1) ............................... Breaks the safety circuit when the left cover 1 is opened.
4. Safety switch 2 (SSW2) ............................... Breaks the safety circuit when the front cover is opened.
5. Upper paper switch (PSW-U)....................... Detects the presence of paper in the cassette 1.
6. Lower paper switch (PSW-L) ....................... Detects the presence of paper in the cassette 2.
7. Upper lift limit switch (LICSW-U).................. Detects the cassette 1 lift reaching the upper limit.
8. Lower lift limit switch (LICSW-L) .................. Detects the cassette 2 lift reaching the upper limit.
9. Upper paper size length switch
(PLSW-U) .................................................... Detects the length of paper in the cassette 1.
10. Lower paper size length switch
(PLSW-L) ..................................................... Detects the length of paper in the cassette 2.
11. Upper paper size width switch
(PWSW-U) ................................................... Detects the width of paper in the cassette 1.
12. Lower paper size width switch
(PWSW-L).................................................... Detects the width of paper in the cassette 2.
13. MP paper switch (MPPSW) ......................... Detects the presence of paper on the MP tray.
14. MP paper size length switch
(MPPLSW) ................................................... Detects the length of paper on the MP tray.
15. MP paper size width switch
(MPPWSW).................................................. Detects the width of paper on the MP tray.
Machine front
Machine inside
Machine rear
1
9
10
11
16
23
17
36
26
33
29
30
28
18
19
34
32
35
24
25
20
21
22
15
14
31
27
13
12
2
3
4
5
7
6
8
37