Kyocera KM-3050

2GN/2GP/2GR-7
1-3-50
U223
Operation panel lock
Description
Sets the operation panel lock function to ON or OFF.
Purpose
To restrict operation in the system menu on the operation panel.
Setting
1. Press the start key.
2. Select the item.
Initial setting: Unlock
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U234
Setting punch destination
Description
Sets the destination of optional punch unit of 3000-sheet document finisher.
Purpose
To be set when installing a different punch unit from the destination of the machine.
Setting
1. Press the start key.
2. Select the destination.
Initial setting: INCH (Inch specifications)/EUROPE METRIC (Metric specifications)
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
Maintenance
item No.
Description
Display Description
Unlock Release the lock of the operation from the system menu.
Partial Lock Partially lock the operation from the system menu.
Lock Entirely lock the operation from the system menu.
Display Description
AUTO With no punch unit
JAPAN METRIC Metric (Japan) specifications
INCH Inch (North America) specifications
EUROPE METRIC Metric (Europe) specifications