Kyocera KM-3050

2GN/2GP/2GR-7
1-3-77
U425
Figure 1-3-29
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U510
Setting the enterprise mode
Description
Sets whether or not the enterprise mode setting is enabled.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: ON (Inch specifications)/OFF (Metric specifications)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
30 mm
A
DE F
B
C
50 mm
Leading
edge
Left edge
Black
belt (a)
Black
belt (b)
105 mm
190 mm
148.5 mm 267 mm
Original for adjustment
[MAIN ADJ] =
((A + C) / 2 + B) / 2
[SUB ADJ] =
((D + F) / 2 + E) / 2
Display Description
ON Enterprise mode setting is enabled.
OFF Enterprise mode setting is disabled.