Kyocera KM-3050

2GN/2GP/2GR-2
2-3-16
YC5 1 SCAN0 - - Ground
Connected
to the upper
operation
unit PWB
2 SCAN1 O 0/3.3 V DC (pulse) Scan signal 1
3 LED5 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 5
4 LED6 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 6
5 LED7 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 7
6 S_LED0 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 0
7 S_LED1 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 1
8 SGND - - Ground
YC6 1 SCAN1 O 0/3.3 V DC (pulse) Scan signal 1
Connected
to the front
operation
unit PWB
2 LED5 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 5
3 LED6 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 6
4 S_LED1 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 1
5 SGND - - Ground
YC7 1 + O Analog Speaker sound signal (+)
Connected
to the
speaker
2 - O Analog Speaker sound signal (-)
YC8 1 TOP I Analog Touch panel X+ position signal
Connected
to the touch
panel
2 LEFT I Analog Touch panel Y+ position signal
3 BOTTOM I Analog Touch panel X- position signal
4 RIGHT I Analog Touch panel Y- position signal
YC11 1 12V I 12 V DC 12 V DC power source input
Connected
to the power
source PWB
2 5V I 5 V DC 5 V DC power source input
3 5V I 5 V DC 5 V DC power source input
4 PGND - - Ground
5 SGND - - Ground
6 SGND - - Ground
7 NC - - Not used
YC13 1 12V O 12 V DC 12 V DC power source output
Connected
to the
inverter
PWB
2 PGND - - Ground
3 LCDBKLT O 0/5 V DC LCD back light: On/Off
4 ADJUST O Analog LCD back light brightness adjustment signal
5 SGND - - Ground
YC14 1 5 O 5 V DC 5 V DC power source
Connected
to the cool-
ing fan
motor 7
2 FAN_REM O 0/5 V DC CFM 7: On/Off
Connector Pin No. Signal I/O Voltage Description