Kyocera KM-4230

Using Printer Management Utility
12
12-53
✎
Note
To apply changes to the “Enable NetWare”, “Frame Type”, “Print
Queue Scan Rate”, “Mode”, and “Printer Number” parameters, restart
this machine (turn it off, then on again).
Common Setting – NetWare Status
Information concerning the NetWare connection status can be checked.
Procedure
➜ Click the “Network” tab, click Common Setting, and then click
NetWare Status in the sub-menu that appeared.
Print Queue Scan Rate Set the NetWare queue scan rate.
The default value is 1 second.
Settings: 1 to 65535 (seconds)
Mode Set the operation mode of the printer service.
Settings: PServer or NPrinter
Printer Number Set the NetWare printer number. If set to 255, the number is
automatically assigned.
Settings: 0 to 255
NetWare Server Displays the NetWare server name.
Queue Name Displays the NetWare server queue name.
Queue Status Displays the NetWare server queue status.