Kyocera KM-4230

12
Using Printer Management Utility
12-54
Common Setting – Windows Configuration
You can specify Windows print settings.
Procedure
➜ Click the “Network” tab, click Common Setting, and then click
Windows Configuration in the sub-menu that appeared.
✎
Note
To apply changes to the “NetBIOS Name”, “Printing Service Name”,
and “WorkGroup Name” parameters, restart this machine (turn it off,
then on again).
Enable Windows Printing
Service
Set whether to use the Windows printing service.
Settings: “Enable” or “Disable”
NetBIOS Name Set the NetBIOS name.
Settings: Up to 15 characters (alphanumeric characters only)
Printing Service Name Enter the printing service name.
Settings: Up to 13 characters (alphanumeric characters only)
WorkGroup Name Enter the work group name.
Settings: Up to 15 characters (alphanumeric characters only)