Using Printer Management Utility
12
12-55
Common Setting – LDAP
You can specify LDAP settings.
✎
Note
In order for LDAP settings and network user authentication settings to
be specified on this machine at the same time, the LDAP server and
the server for network user authentication must be the same.
Procedure
➜ Click the “Network” tab, click Common Setting, and then click LDAP
in the sub-menu that appeared.
LDAP Set whether to use the LDAP search function.
Settings: “Enable” or “Disable”
LDAP Server Address Enter the IP address or server name (host name) to set the
LDAP server address.
Settings: Alphanumeric characters only, the first character
cannot be a number for the server name
SSL/TLS Set whether to perform communications with the LDAP server
using SSL/TLS.
Settings: “Enable” or “Disable”
Port Number Set the port number used to communicate with the LDAP
server.
To Next Page
Loading...
